Power Grid Cabinet Industrial Peltier Cooler Dehumidifier with Heating Function

• Customization: Available
• Certification: RoHS, CE, UL
• Fan: With Fan
• Model NO.: DH063
• Control: Automatic
• Suitable Temperature: 5-38 Degrees Celsius
• Structure: Integral
• Type: Cooling
• Power Supply: 85V~265VAC/DC 50Hz
• Peltier Rated Power: 60W
• Heater Power: 50~500W Optional
• Screen: 2digital LED
• Physical Dimension: 132*245*67mm
• Transport Package: Containers
• Specification: 10*10cm
• Trademark: Blue Jay
• Origin: Chongqing, China
• Production Capacity: 1000 Piece/Pieces Per Month

Product Description

The intelligent dehumidification device adopts the semiconductor refrigeration dehumidification method, actively sucks the humid air in the confined space into the dehumidification duct under the action of the fan, and the water vapor in the air is condensed into water after passing through the semiconductor refrigeration mechanism and then discharged out of the cabinet through the water pipe Body, can achieve a good dehumidification effect.

 

By reducing the water content in the air, the relative humidity and absolute humidity are reduced at the same time, the temperature is hardly raised, and there will be no negative impact caused by the temperature difference, which fundamentally eliminates or reduces the occurrence of accidents, and will not accelerate the cabinet due to high temperature. Aging of internal components and cabinets. Effectively prevent safety hazards such as aging of equipment in the cabinet, reduction of insulation strength, breakdown of secondary terminals, mildew of materials and corrosion of steel structural parts, and ensure the safe operation of the power grid.
 

Feature

1. Small size, lightweight, easy installation.
2. Dehumidification ducts actively induce condensation, discharged gas dehumidified by heating
3. Automatic/manual dehumidification function optional, temperature and dehumidification start threshold adjustable.
4. Humidity and temperature sensor 24-hour real-time sampling, beyond the set start threshold automatically induced condensation.
5. Optional RS485 port, support remote control/adjustment of operating parameters and fault reporting function.
6. Do not need an extra sensor and probe, Optional passive output node for external heater.
7. Adopt special moisture-proof components to ensure normal operation in humid environments
8. One-way passive output node.

 

Specification

Working power
Power supply	85V~265VAC/DC 50Hz
Peltier rated power	60W
Air volume flow	70m3/h
Dehumidifying capacity	300ml/Day,@35°C,90%RH
Measurement and ability
Humidity monitor range	20%RH~98%RH
Sensor accuracy	±5%RH
Dehumidify start threshold	45%RH~98%RH, Default 65%RH
Environment temperature	5~60°C
Temperature monitor range	-40~80°C
Sensor accuracy	±1.0°C
Heater start threshold	1~55°C, Default 5°C
Heater power	10~300W optional
Other
Aqueduct	Silicone D10mm, L1.5m
Physical dimension	130mm*243mm*60mm
Screen	2*3 digital LED
Standards	IEC60255-22-1
Communication	RS485, Modbus-RTU (Optional)

Note: If you have any puzzles or requests about this product (including model number, data sheet or any other aspects), please contact us immediately.

Application

* GIS control cabinet
* High and low voltage control cabinet
* High and low voltage switchgear
* Ring network cabinet, outdoor terminal box
* Mechanical control cabinet, box type substation

Company Profile

Certifications

Our Service

FAQ