| Theory: | Electromagnetic Relay |
|---|---|
| Usage: | Insulation Monitor |
| Phase: | 3 |
| Electricity Type: | Dc |
| Number of Pole: | 3 |
| Load: | Medium Power Relay |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier GYDCG-UB1K series is a DC-to-ground insulation monitoring module based on the principle of the unbalanced bridge, with monitoring and protection functions in one. It can monitor the positive and negative pole-to-ground insulation resistance of the DC floating system, ranging from 0Ω to 10MΩ; at the same time, it can also detect the DC voltage value, ranging from 0V to 1000V. The user can obtain the measured value through RS485 communication and can set the alarm resistance threshold through the DIP switch or RS485 communication. When the insulation resistance is less than this value, the fault relay will act and the L2 indicator light will be on. At the same time, passive reset and automatic reset can also be selected through the DIP switch configuration bit, and the module stops working at the same time as manual or remote reset.
1. Real-time online monitoring, high reliability
2. High measurement accuracy of DC voltage and insulation resistance
3. can be started manually or remotely
4. Comes with an RS485 communication function
5. Small size, lightweight, easy to operate, easy to install and replace
Size (mm): Length 110* width 45* depth 75
DC voltage range:0~1000VDC
Supply voltage:19~36 VDC
Alarm resistance setting range (panel):1k~10M(ohm)
Alarm resistance setting range (communication):1k~10M (ohm)
Insulation resistance measurement range:1k~10M (ohm)
Reset mode: Remote short reset, manual reset, communication reset
communication method: RS485 Protocol, Standard MODBUS protocol
Internal ground impedance:1024k (ohm)
Relay output form: Normally open + normally closed
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}